$340 $340
00 00
$129 $129
00 00
40100
WHEEL STUD
INSTALLER
Fits on most 5, 6 and 8 lug hub
assemblies found on cars and trucks.
Bolt the 1/2" thick driving plate to the
hub using the hardened washers and
existing lug nuts. Insert the hardened
acme threaded forcing screw to push
against a solid surface to loosen the
hub assembly. To completely remove
hub the forcing screw must push from
a least two different solid points. Use
the tool with caution, and do not push
on only one solid point.
HUB REMOVER
(LIS)
Use with a ratchet or impact
wrench to pull the new stud
securely in place. Position the tool
over the stud shaft. Tighten the lug
nut against the tool to pull the stud
in place.
The Handy Packer works on
bearings up to 3 1/2" O.D. The
grease stays in the tool cavity, not
on your hands. To pack a bearing,
place the bearing on the piston.
Press down on the cap until the old
grease is forced out and the new
grease shows on top of the
bearing.
HANDY PACKER
BEARING
PACKER
$27 $27
00 00
22800
$24 $24
50 50
34550
15.
